UncategorizedHow is Carpet Cleaning Done?


Carpet cleaning is usually done to remove dirt, stains, allergens, and odors from carpets to make them look and feel new again.There are professional cleaning services, like Bluegrass Cleaning Company from Lexington KY, that do it for you. There are many different ways that carpet cleaners are used to clean your carpets and some of them will be explained here.


Vacuum cleaning: This is the easiest and most widely used method of carpet cleaning. It is done by a vacuum cleaner that uses suction to suck dirt and debris from carpets using powerful suction. Most common methods involve hot water extraction, wet-dry vacuuming, or dry-cleaning. It should be noted that this method is not for all carpets because it can damage the fibers in your carpet if used improperly. If your carpeting is very dirty then you should definitely use hot-water extraction. You should also wear rubber gloves to prevent your hands from getting too close to the machine.


Detergent cleaning: This is a process that uses a strong liquid, either a dish washing detergent or commercial carpet shampoo, to clean stains on carpets. The detergent should be mixed with hot water to create lather. After the lather has been created, it should then be spread over the affected area. You should remember to avoid applying too much detergent to the carpet because it can damage the fibers. After the stain has been removed, the carpet should be left to dry in a well-ventilated place to allow the detergent to evaporate completely. You can do this by leaving the rug in a machine at a high speed for approximately thirty minutes. The time varies depending on the type of carpet you have.


Steam carpet cleaning: This is a technique in which a carpet-cleaning machine is used instead of a traditional vacuum cleaner. The steam cleaner sucks the dirt out of the carpet with an extractor and allows the air pockets to be pulled out. The machine will typically work at up to sixty-four gallons of pressure. This method should only be used on very dirty carpets that cannot be cleaned using regular vacuuming techniques. A steam cleaner is also effective for removing stains from extremely dirty carpets because it can remove the dirt from fibers that are not able to be vacuumed out with other methods.


Hot water extraction: Hot water extraction is another popular method. This is where hot water is poured on the carpet before the carpet cleaner begins to work on it. The process is usually done in a machine similar to a vacuum cleaner. In most cases, this is the most effective method for removing all but the largest amount of soil. You should always wear rubber gloves when you are doing this as you can get very warm and burn your hand from touching hot surfaces.


Dry cleaning: This is another form of carpet cleaning that is used for very clean carpets that can be done in a home environment, such as those that are installed in a restaurant, hotel, office, etc. These methods are typically only done in residential settings, since they are not meant for industrial-sized carpets. With this method, chemicals are used to help clean the carpet but not bleach it. For this reason, the dirt, spills, stains, and mold may still remain on the carpet. This cleaning method is also used when it comes to cleaning hardwood flooring.

Contact us now to get quote

Contact us now to get quote

Contact Us

4654 Sunset Drive, Pine Bluff, AR 71601

Emergency Service